Asus is one of the renowned brands in the networking world, with its wide-ranging wifi enabled devices. These devices range from wireless routers to top-notch wireless extenders. Additionally, these devices are based on the latest WiFi 6E technology, facilitating high-speed internet speeds and seamless connectivity. However, to make the most of this networking device, the Asus Zenwifi Pro ET12 Setup is necessary. ​

Therefore, if you are looking for assistance with this configuration, then stay focused here. Hereon, you will learn about how to configure the Asus Zenwifi Pro ETt12 AXE11000 Tri-band WiFi 6E Mesh System​ effortlessly. Further, this guide reflects on the different ways to set up the Asus Zen WiFi Pro. For more insights, reach out to us!

How to Perform the Asus Zenwifi Pro ET12 Setup​?

Before you begin with the Asus Zenwifi Pro configuration, you must have several things with you. These things include a stable internet connection, accurate web/IP address, valid admin credentials, etc.

After that, you should select a suitable method to configure your device. Generally, there are two ways to configure your device i.e., web GUI and via the app. This section outlines the complete procedure to configure your device seamlessly. So, have a look at the below steps:

Setting Up the Asus Zenwifi Pro ET12 Via Web Browser

  • First of all, power on your Asus networking device.
  • Then, connect your computer or laptop to the existing wifi network. 
  • Further, open the web browser and type the asusrouter.com web address in the browser bar.
  • Now, a login page appears to you. 
  • Hereon, mention your default username and password and hit ‘Sign In’.
  • After that, you reach the setup wizard of the Asus router.
  • Next, navigate to the General>Network Map to configure the 2.4 GHz security settings.
  • Herein, change the SSID and password to secure your network under the WPA2-PSK authentication method. 
  • After that, tap on ‘Apply’ to save these settings. 
  • Further, visit the Administration to change the Operation Mode to Wireless Router, AP Mode, Repeater Mode, etc.
  • Similarly, visit the System Settings to change the router login password, time zone, WAN settings, etc.
  • Additionally, visit the Advanced Settings to configure the Parental Control, Firmware Update, Guest Network, etc. 
  • Finally, save and apply these settings.
  • With this, the Asus Zenwifi Pro ETt12 AXE11000 Tri-band WiFi 6E Mesh System​ is configured. 

Using the App For the Asus Zenwifi Pro ET12 Setup

  • Initially, install or update the Asus Router app on your smartphone. 
  • Then, connect your smartphone to the existing home network. 
  • Further, launch the app and log into your account.
  • Now, you reach the home dashboard of the Asus router.
  • After that, go to Home>My Devices and confirm the Zen WiFi network is connected.
  • Next, navigate to the Settings (gear icon) appearing on the navigation bar.
  • Hereon, configure the Wireless and Advanced Settings as per your preferences.
  • Lastly, save the modified settings and complete the configuration.

Facing Issues With the Asus Zenwifi Pro ET12 Configuration? Try These Fixes!

Despite the aforementioned simplest procedure of the Asus Zenwifi Pro ET12 Setup​, some users get stuck during this process. Mainly, they face issues due to internet connectivity issues, power outages, technical issues, etc. So, to eradicate these issues, use the below-given troubleshooting tips:

  • Most importantly, stabilize your internet connection. You can use the ethernet cables to stabilize your internet connections.
  • Then, check the cable configuration and power supply and make sure everything is working fine.
  • Certainly, discard and replace the faulty, burnt, and damaged cables and use the original power adapters only.
  • Double-check the web address and login credentials when accessing the Asus admin panel. 
  • Further, eliminate the network barriers like glasses, heavy furniture, EMW devices, etc., or reposition the router to a central location.
  • Temporarily disable the VPN, Firewall, etc. security extensions during the Asus Zenwifi Pro ET12 Setup.
  • Make sure your router is configured at the recommended 2.4 GHz network frequency band. 
  • Moreover, the power cycle the Asus Zenwifi Pro ETt12 AXE11000 Tri-band WiFi 6E Mesh System​ to fix technical glitches and bugs.
  • Regularly update the firmware files on the Asus router and check the compatibility of this file with your device.
  • Eradicate the browser and app issues by clearing the unwanted data and temporary files. 
  • Also, enable the required permission on the app and web browser when configuring your device.
  • When all else fails, then perform the Asus Zenwifi Pro ET12 Reset​. For that, locate, press, and hold the reset button on the router for a few seconds. Release the button when the LED blinks and the router completes rebooting. 

Bottom Line

Overall, this complete guide elaborates on the Asus Zenwifi Pro ET12 Setup​ process in detail. Additionally, have learned about the different ways to configure your device. Moreover, this guide sheds light on the key configuration issues with suitable fixes. If you want to discover more, visit our official website!