The accurate Asus ZenWiFi XT8 setup should be the primary priority of the user. In order to get the best out of your Asus Mesh WiFi router, you must proceed with the Asus ZenWiFi XT8 setup correctly. The Asus ZenWiFi XT8 is the latest networking Mesh WiFi system with the newest technologies and features. It offers the top-most network coverage, excellent performance, and a seamless streaming experience. Therefore, to enjoy all these features, you must precisely execute the Asus Router setup.
If you require guidance with the Asus ZenWiFi XT8 setup, don’t worry! Today, we’ll discuss the procedure thoroughly. Further, we’ll go through some troubleshooting methods for the Mesh system, including the Asus ZenWiFi XT8 firmware update and Asus ZenWiFi XT8 factory reset.
Pre-Setup Installation
Before we proceed with the Asus ZenWiFi XT8 setup, you must ensure a few things. These things are as follows:
- Make sure you have two ZenWiFi series routers with AIMesh functions.
- Ensure to execute the Asus ZenWiFi XT8 firmware update on both routers.
- Inspect and make sure you have the same model AImesh router and AIMesh node.
- You must place the node at a distance of 1-3m from the router.
These are some pre-setup things you must ensure before executing the Asus ZenWiFi XT8 setup.
Steps for the Asus ZenWiFi XT8 Firmware Update
For a proper setup, you must proceed with the Asus ZenWiFi XT8 firmware update. Outdated firmware can cause issues with the setup. You can update firmware manually as well as automatically. The steps for the setup are as follows:
Asus ZenWiFi XT8 Firmware Update Automatically
- Initially, connect your device to the router’s network.
- You can use an Ethernet cable or establish a wireless connection.
- After that, open a web browser on that device.
- Now, enter the IP address of the router in the address bar.
- When the login page displays, enter the default username and password of the router.
- After logging in, you will see a notification regarding the latest firmware version.
- To proceed further, click ‘Update Now’ to upgrade the firmware.
- Now, you will be sent to the ‘Firmware Upgrade’ page.
- Finally, tap on ‘Firmware Upgrade’ to update the firmware.
Asus ZenWiFi XT8 Firmware Update Manually
- If you are unable to update the firmware through the first method, you can upgrade it manually as well.
- Firstly, go to the Asus Support page and download the latest firmware version.
- To download the correct firmware file, you will need the model name of your router.
- After that, convert the file into a zip file.
- Now, log into the user interface of the Asus router.
- Hereon, from the ‘Advanced’ settings, go to the ‘Administration’ page.
- Now, tap ‘Firmware Upgrade’ and click ‘Upload’ to upload the file.
- At last, you can select the file you have chosen and then upload it.
- Give the router some time to upgrade the firmware.
These are the steps for the Asus ZenWiFi XT8 firmware update. Asus recommends resetting the router after upgrading the firmware. Now that the firmware is up-to-date, we can proceed with the Asus ZenWiFi XT8 setup.
Process for the Asus ZenWiFi XT8 Setup
You can set up your Asus Mesh system via a wired or wireless connection. The procedure for both methods is as follows:
Setting Up the Router Via a Wired Connection
- Firstly, connect the router’s AC adapter to the DCIN port and power it On.
- After that, link the PC to the router’s LAN port using the network cable.
- Now, connect your router to the modem with another network cable.
- At last, connect the AC adapter to the DCIN port and power it On.
Setting Up the Router Via Wirelessly
- Initially, connect the AC adapter of the router to the DCIN port and power it On.
- Now, link the modem to the WAN port of the router using the network cable.
- After that, plug the AC adapter into the DCIN port of the modem and turn On the power.
- Finally, install an IEE 802.11a/g/n/ac WLAN adapter on your device.
Now that we have connected the router and the modem, we can proceed with the setup.
Configuring the Asus ZenWiFi XT8
- Primarily, open any web browser of your choice.
- Now, enter the IP address of your router to access the login page.
- When the login appears, type in the default username and password to log in.
- If you are logging in for the first time, the QIS will automatically display.
- Now, the router will identify the ISP connection automatically.
- After that, you need to enter all the necessary information regarding your ISP.
- You can call your ISP and obtain the information.
- Hereon, you can set an SSID name and password for your network.
- At last, click ‘Apply’ to save the changes.
- Now, you can enable a Guest network and various other features through the user interface.
This is the complete procedure for the Asus ZenWiFi XT8 setup.
Advanced Configuration and Troubleshooting
After setting up the router, you can enable the DHCP server. The steps for this are as follows:
- Initially, log into the admin panel of the router.
- Now, from the ‘Advanced Settings’ go to LAN and then to the DHCP server tab.
- From there, you can enable the DHCP server as well.
- After that, type in a domain name for the router.
- Hereon, enter the starting IP address key, in the IP pool starting address field.
- Now, enter the ending IP address key, in the IP pool ending IP address field.
- Finally, enter the time period when the IP assigned by you will run out.
These are the steps to enable the DHCP server. Further, we’ll discuss some troubleshooting methods.
Troubleshooting the Asus ZenWiFi XT8 Issues
If you are facing issues such as you are not receiving a proper WiFi connection, or any other similar issues, you can try the following methods to troubleshoot it:
Power Cycle the Router
- To power cycle the router, power Off and unplug the router for a little while.
- After a few minutes, you can turn the power back On.
- Now, you can reconnect your devices to the router.
- This should eliminate any glitch or bug within the router.
Check the Wired Connections
- Another reason could be an improper connection between the router and the modem.
- Check all the wired connections, and ensure no connection is loose.
- Ensure to plug the router into a stable power source.
- You can try plugging the router into another power outlet.
Asus ZenWiFi XT8 Factory Reset
- Firstly, power Off the router.
- Secondly, locate the WPS button on the rear panel.
- Now, press the WPS button and hold it for some time.
- When the power light turns on, turns green, and then turns Off, release the button.
- After this, reboot the router.
- Finally, the Asus ZenWiFi XT8 factory reset is complete.
- Now, you can set up the router again, as the default settings are back.
These are some troubleshooting methods you can try to fix any issues within the router. Just remember that the Asus ZenWiFi XT8 factory reset should be your last resort. Since the reset will restore the factory default settings, only execute it in extreme cases. If there are any other issues you are facing with your Asus ZenWiFi XT8 router, you can get in touch with our team right now!