Nowadays, we all are aware of the Wi-Fi 6 technology and the routers we use to drive this technology. Additionally, Asus brings the latest RT-BE96U router series that is also compatible with the upcoming Wi-Fi 7 technology. Therefore, to make the most of this super-fast internet gateway, you need to know the Asus RT-BE96U setup procedure first. 

Additionally, this router comes with dual 10G ports that maximize the wired connectivity and assure flexible network configuration. Likewise, its smart connect features enable this access point to connect automatically with the available bandwidths. You simply need to select the appropriate bandwidth that you find suitable for your requirements. Hence, go with the Asus router setup methods with us. 

In this blog post, we will explain to you the steps for configuring your RT-BE96U router hassle-free. Here, we start with the requirements first and then the process to set this router up. Stay tuned here!

What do you need for the Asus RT-BE96U setup?

Before you delve deep into the setup process for your Asus router, you must gather a few of the equipment pieces that we listed below:

• RT-BE96U router & modem
• Stable network connection
• Default admin details
• Web or IP address
• Ethernet cable
• Smart device

Steps to set up the Asus RT-BE96U router

Moreover, while you are going to start the Asus RT-BE96U setup, must preinstall your router and prepare the modem setup. In this section, we will explain to you the complete steps for hardware installation to the complete setup for your router. Let’s have a look beneath:

Hardware installation

• Initially, connect your modem to the WAN port at the back of your router using a network cable.
• Plug your router into the power socket and power it on.
• Next, check the LEDs on the modem are turned on. 
• After that, plug in the adaptor to the DCIN port and press the power switch. 
• The power LED on the router gets turned on after completing the router installation setup. 

Setting up the Asus router using asusrouter.com

• To begin with, ensure your router is turned on.
• Next, connect the router network to the device and make sure the network connection is active.
• After that, navigate to the asusrouter.com web address or use the 192.168.1.1 IP address and click on Enter. 
• Further, type your admin login details here and tap on Login. 
• Now, you reach the smart Home screen of the RT-BE96U gateway.
• Next, go to the settings and configure the router according to your specific needs.
• Also, change the username and password of the network for security.
• Finally, click on the Save to apply the settings you made to your router. 

Asus RT-BE96U setup through the app

• First and foremost, download the Asus router on your smart device.
• You can download it from the App Store or Play Store.
• Next, open the app and create an account to log in.
• If you are already using the app, then log in with your admin details.
• Now, click on the SetUp and then the “+” sign to add the device. 
• Further, tap on the Asus router and then RT-BE96U.
• After that, click on “Connection type – Automatic IP: Tap “Next”
• Now, follow the further instructions to complete the process. 

How to troubleshoot the Asus router setup issues?

In addition, users sometimes complain that their Asus router can’t be set up due to some errors. However, these issues are common and temporary. So, you need to pick an accurate solution to fix these errors. The problems may be network drop-off, blinking light, or no network, etc. So, here we explain to you the appropriate troubleshooting methods that will assist you in resolving these errors. 

Reboot the Asus router

• Sometimes network interference or drop-off is temporary.
• You can fix them by restarting your router. 
• To reboot your router, plug out the router, computer, and then the modem.
• Now, wait for 30 seconds and plug back them as you remove them.

Update the Firmware

• Occasionally, issues may arise due to outdated Firmware.
• So, visit Advanced Settings and check for the Firmware update.
• If the window prompts for the upgrade, then tap on Yes and continue with the update.
• Remember to download the current and compatible version as per the Asus router model you are using.

Ensure sufficient power supply

• Commonly, set-up errors may arise due to the power outage on your router.
• Hence, check the power source for your router.
• Do not plug the adaptor into a brunt or cracked switch.
• If still power socket not works, change it.

Contact ISP

• Network errors may occur due to the local area network maintenance from the ISP side.
• So, contact your ISP authority to know the faults or for the time it takes.

Use the correct web address

• A few of the users enter incorrect web or IP addresses into the URL bar.
• Hence, cross-verify the web address you are entering.
• Use the correct web or IP address to continue the Asus RT-BE96U setup.

Factory Reset

• If none of the above-discussed methods will work, then go for the Factory Reset.
• Keep in mind it will bring back your router to its default settings.
• To begin with, look for the reset button on it.
• Press and hold the button for 10 seconds using a pinpoint or paperclip. 
• Now, release it and wait till the router reboots itself and goes back to its default settings. 
• Finally, the Asus router Reset is completed and you need to reconfigure it. 

Wrapping up

All in all, the latest range of the Asus routers is widely acceptable by users due to its support of the Wi-Fi 7 technology. They are ultrafast models and come with two 10G ports for flexible cable connections. Likewise, the information we share for the Asus RT-BE96U setup will help you to configure your router effortlessly. 

Additionally, you can opt for any of the above-mentioned methods. Similarly, if you are facing trouble during the setup procedure, then must check the troubleshooting methods we explain here. Still need assistance? We are a text away!

The post How to Install and set up the Asus RT-BE96U router? appeared first on router.asus.com | log into my router asus.